Graphicvn

Creating A Lens Flare With The Wordpress Logo- Photoshop

2007-10-22T18:13:00.000+07:00

Hey

I was busy stumbling across the internet and I came across this site. Called Word Press Customization its a well design site, about creating Wordpress theme blogs. Anyway, the header particularly struck me as something that would be easy to recreate in Photoshop. This tutorial can be applied to nearly any logo. But i'm gonna try and match the original, I wanted something to aim for. The image on the right is the cropped version of what the final piece should look like. Click any of the image to enlarge.

Step 1) The first step is to create the canvas and download the Wordpress logo. Click the image below for the full size. You need to create your canvas as large as you want it. I recommend around 1600 pixel x 800 pixels high. The larger the better. Set the colour to black.

Step 2) Place the logo in the centre of the page on a new layer. You don't want the logo to be overly large, but then again don't make it tiny.

Step 3) The next step is to start creating the effects. Duplicate the logo layer. Merge this layer with the black background layer (Layer > Merge Layers). This merging of the layers will be used to help create the lens flare. The next step is to use the lens flare function. Go to Filter > Render > Lens Flare and set the options to 105mm Movie Prime, and about 70-100%. Change these values depending on how your image looks. Click Ok when you are done.

Step 4) Create a new layer above the background layer, but below the logo layer. Using the eye dropper tool (I) select a light blue colour from the logo. Using the colour fill the new layer you have just created. Set the layer blend mode to colour. The white lens flare you have just create should now be a cool blue colour. Adjust the opactiy of the new layer if needed.

Step 5) The next step is to apply some lighting behind the logo. Duplicate the logo layer. You can at this point place it behind the logo or wait till the end of this step. With this new layer go to Image > Adjustments > Brightness/Contrast and set the brightness to full.

The next step is to blur out the layer. Go to Filter > Blue > Gaussian Blur and blur out the image. I've chosen a value of 30. You may need to change this depending on the size of your image.

Step 6) Set the blend mode of the layer to Hard Light, duplicate this layer and change this blending mode to Overlay. This will create a subtle light around the logo.

The logo now shines. Since the white shine was created with the logo it doesn't look to fake, since the original logo was used.

Step 7) You could at this point finish. Since the image does look good. But I want mine to match the one I have found.

The next step is to add a streak of white. Create a new layer underneath the logo (mine is shown ontop) and add a white streak with a soft brush. It wants to be around 30 - 40 pixels. Make a nice simple sweeping action around the bottom. Apply, again, a Gaussian Blue of about 5. To blur this out. Set the mode to Overlay.

Step 8) Duplicate this layer you have just created, and smash Cmd + F (Ctrl + F on Windows) half a dozen times, this is to reapply the blur. Change this layer blend mode to soft light (seeing a pattern with the blending modes?)

Step 9) Duplicate the last layer again, and remove the blending mode. Reduce the opacity. This can be an optional step, since my white flare looked a little to blue.

Step 10) One of the features of this logo lens flare is the small circles. This "traditionally" looks like a lens flare. It is easier at this stage to create one manually using the brush options in Photoshop.

To create the brush style find a hard brush about 20 pixels in size. Open up the Brush Dialog Box (F5 Window > Brushes). In the Shape Dynamics box change the jitter to 100%. This will make the brush strokes move about.

Next in the Scattering section change the scatter to about 600% and the Count Jitter upto 100%. This will move the placement of the brushes strokes around on the x and y axis.

Step 11) Using a yellow/orange colour apply a small amount of jitter on a new layer. Do not over do this. It wants to be a subtle as possible. Do the same with a blue colour.

Step 12) On these new layers (I have 2) change the blending options to screen to reduce the amount they are visible by. It is a good idea at this point to erase and re-do any parts you don't like. As well as this experiment this the Gaussian Blur in blurring out the parts.

Step 13) The next step is to add a swoosh at the bottom of the logo. On a new layer again use the Circular Marquee tool to create a circle on this layer. It doesn't have to be perfect. Then go to Edit > Stroke and set the stroke to 3-4px depending on how it looks. If it is to big/small undo and change the size. Change the colour to white.

You should have something like this.

Step 14) De-select the Marquee (Cmd/Ctrl + D). With the Swoosh layer still selected go Filter > Distort > Twirl. Twirl this layer. At this point it doesn't matter how you twirl it. I wouldn't recommend doing it to much. If you don't like what has been achieved undo and re-apply the filter. When you have a nice twirl, remove with the eraser the top part. Move (V) is necessary to a new part of the canvas.

Step 15) Set the Blend Mode to Overlay and repeat the twirl if necessary.

Step 16) Crop into a letter box shape and save out. You can click the image below for the full version.

I hope you liked this tutorial, it can be applied to nearly any logo. Please leave a comment.

From great-design.blogspot

Nice navbar

2007-10-22T18:07:00.000+07:00

Begin by creating a new file (File>New) with 400x70 px and 72 dpi, and fill it with #363636

Now use the rounded Rectangle Tool , and fill it with #0072bc and add a white stroke

It’s time to create one more new file with 4x4 px and 72 dpi. Choose after that the Pencil Tool (B) of 1 px to create a pattern, like that one from below, colored with #003D76

Choose now the Custom Shape Tool (U) and choose a nice shape. The shape’s color is white.

Now create a small box with #80b9de colored stroke and set the fill % at 0.

Repeat the step but now set only the opacity at 50 %

See the result:

Extreme (Photoshop) Makeover

2007-10-22T18:06:00.001+07:00

Speed Painting

2007-10-22T18:04:00.000+07:00

Fossil Butterfly In Resin

2007-10-19T11:23:00.000+07:00

1. Create a new layer, use Gradient tool with color #823D29 and #E3DC8D and make a gradient background like this:

2. Go to Filter -> render -> clouds

3. Use pentool or ellipse tool to draw an ellipse shape with gray color

4. Go to Layer in menu bar, choose Layer style and do as the picture below:
Drop sadow: color #4F372C

5. Inter Shadow: color #4F372C

6. Outer Glow: color #ECD12D

7. Inter Glow: color #2F4C97

8. Bevel and emboss

9. Contour

10. Satin

11. Color Overlay

12. Pattern Overlay: click in the small box beside the pattern and choose rock pattern, you can choose any pattern you like, click OK

Pick a butterfly picture like this

Remove the background of butterfly by some tools like lasso...Set opacity 87% and flow 90% in layer box
Duplicate layer ellipse and put it on butterfly layer then set opacity 32% and flow 50%
Finally, you have a fossil butterfly in resin

Another result

From photoshop8x

Colouring the picture

2007-10-19T11:20:00.000+07:00

Last tutorial, I showed you how to draw a girl, and now I'm going to show you how to colour that picture.

1 first , we have a sketch picture .
You put Layer sketch in the top and choose "multiply" in layer box

2. You use brush , choose the "color" in Mode box . opacity 50% .
You are painting eyes with blue color or whatever color you like deep blue

3. painting the skin : u create a layer , put the layer behind the layer sketch .You choose "multiply" for this layer . I click in color box and choose the color like color of skin #FFE4B8
#FFDCAD #FCC283 #EDA14F
Use the soft brush with opacity 60% .
You begin with the most pale color . #FFE4B8 . After that , you paint the shadow color with opacity less than 50%

4.shirt
You select all the shirt in this picture . and then , you click in fill --pattern and choose the pattern that you like , I choose a green pattern

5. painting hair . You still using soft brush and choose the color FFC835 , yellow color , or what color you like . But I think you should choose the light color to make the girl more beautiful . You painting all of the hair

Choose soft brush , opacity : 30% . color : white , paint the light in the hair.

Painting flower : choose pink color and painting with soft brush, Normal and opacity 100 %. After that , you choose Overlay and paint the line in flowers with opacity 50%

I choose this brush to paint all points in the flower.

You use the pentool to draw the light in her eyes. After that, you use white colour to fill it. Choose hard brush and paint the small light with blue and white colour.

This is my final result:

Draw a girl

2007-10-19T11:06:00.000+07:00

The pen tool in Photoshop is so useful and interesting if u know how to use it like a vector

Step 1 :how to use the pentool

Star a new carvas , size 5 or 9 . You select the pen tool , setting the line , not the shape

Click some where on your canvas ,A dot appears where you clicked. (1)

Now click on another spot on the canvas , another dot appears now click in the middle of the line

Hold Ctrl and click on the middle dot . Now drag so the line is curved

Go back to the pen tool . you click right mouse and a seclect strock path
The line path is appear ( the corlor and size of strock path depend on brush )

You can change another kind of line
Click right mouse and choose strock path
But this time, click the box for simulate pressure. Click ok, right click, the delete path

Step 2 : drawing path
If you have a picture .you open it
Make a new layer above your sketch , name it "line" zoom to 200 ro 500 %.Get the pen tool again , go over your lines using the techniques shown above.

You make the opacity low (50%)
Once you finish one line segment, press ctrl and click anywhere on the canvas , the start on your next line

You can draw face on another layer , hair on another layer .

When you finish the line picture , you have 4 layer : hair , face, body, flower

From photoshop8x

Kidnapped by aliens

2007-10-19T10:51:00.000+07:00

open you PS and open a new layer filling the background with black color

select the brush and set it on 300 with hardness on 0 and draw a circle at the bottom

click on layer >new adjustment layer and channel mixer, set the colors on green

(but this is uo to you)

click on brush again and riduce the size of 50% then draw a line from the circle up to the top

duplicate your layer and go on Filter>texture>grain using the setting on the picture, then, screen and fade on 78%

click again on channel mixer and fade the arrows to match the colors

now open a new picture

with the eraser clean it a bit and then again channel mixer to match the color of your ray

now with the brush on fuzzball enhance the eyes

copy and paste on the new picture the ray clean it a bit fade it qith the "fill" option

again duplicate layer and option screen fade a bit

Final result: i played with color fill to give a blueish environment

well i hope you like this one

From pr13

::LEVEL 87 LINE ART TUTORIAL::

2007-10-19T10:40:00.000+07:00

Text Style Bercahaya dr.emi creative design

2007-10-19T10:38:00.000+07:00

Walaupun mata gue udah spet, jari2 gue dah pgel abis ngetik script dan lelah. Gue smpetin aja deh ngasi tutorial lagi disini, buat netter semua. Perlu diingat bahwa walopun tampilan window pada screen shoot nya kadang selalu berbeda2 setiap tutorial saya, itu hanya skin windows Blind yang saya gunakan selalu diganti2. Jadi jangan kawatir, semua tutorial di dremi.info merupakan asli karya tangan dr.emi Walaupun mirip dengan tutorial yang lain, tapi itu semua hanya perbedaan inspirasi saja. Karena sekalipun konsep dan teknik nya sama, tidak mungkin menghasilkan karya yang sama persis, itu kalo diteliti dengan cermat baik dari segi sudut pengambilan gambar, objek dimensi dan skinning.

Kali ini kita akan membuat efek teks Bercaha di kegelapan. Pertama tentunya siapkan canvas secukupnya, dengan background color Hitam

Gunakan Text Tool untuk membuat text yang akan diberikan efek bercahaya
Download Font nya disini - > MagistralBlackC

Beralih ke Layer > Layer Styel > Gradient Overlay

Masih pada Layer Style, kasi Stroke

Tambahkan style Innerglow

Kemudian satu lagi OuterGlow

Lalu klik OK, lihat hasil sementara nya ... :)

Kemudian untuk memberikan kesan shadow cahaya pada objek text nya, tampahkan gradasi transparan putih di bagian atas text. Caranya tekan [CTRL + Click] pada layer text dr.emi creative design untuk membentuk seleksi.

Lalu pilih Gradient Tool, dengan mode transparent, warna forground colornya putih. Jangan lupa setelah itu buat layer baru karna kita akan membuat objek baru diatas layer text.

Kini tarik gradasi dengan gradient tool yang telah Anda pilih, dari sebelah atas seleksi ke bawah. Sehingga akan menghasilkan gradasi dari putih ke transparan.

Selanjutnya pilih Rectangle Marquee Tool, dan uat seleksi seperti pada gambar. Masih pada layer gradasi transparan, lalu Tekan [DELETE]. Kurangi Opacity layer gradasi transparan menjadi 76 %

Terakhir tekan [CTRL + D] untuk Deselect.

Ok kemudian terapkan konsep keseimbangan pada objek dengan menambahkan sedikit teks "Present" di bawah kiri text dr.emi creative design, dengan setting text yang sama, tapi gunakan ukuran font yang lebih kecil, dan warna kuning muda ( #FDEDB9 ).

Hasil Akhirnya ... akan tampak tulisan yang bercahaya.

Sedikti penjelasan:

Sebenarnya teknik yang digunakan merupakan teknik - Basic - efek layer style. Namun konsep utama nya adalah menciptakan / mengarahkan mata yang melihat objek agar terkesan melihat cahaya pada kegelapan. Karena sebenarnya mata kita hanya sekedar melihat objek yang tidak jauh berbeda saat melihat objek lain pada umumnya, namun karena objek yang kita buat diatas menggunakan background berwarna gelap, maka mata kita akan ber halusinasi menganggap bahwa itu merupakan objek yang bercahaya. Demikian konsep Psikologi yang terkandung dalam tutorial Efek Text bercahaya kali ini. Sekian ... Tunduh Pisaaaaaannnnn .... :D

From dremi

nVidia logo with Photoshop

2007-10-19T10:33:00.000+07:00

Written by Jason Mortimer (Jason) - Visit Website

Tombol Navigasi Proffessional

2007-10-19T10:22:00.000+07:00

Masih semangaaatttt!! oke kalo gitu lanjtu lagi deeehh..

Mau bikin web dengan tombol yang terkesan Proff ? nah mudah2an ini bisa membantu..

Pertama bikin dokumen baru..

Langsung bikin bidang pake Rounded Rectangle Tool ... radius 10 px
Ubah nama Layernya Layer BG

Abis tuu lu kasi Layer style

Nah ini dia hasil sementara na....

Satu lagi bikin objek kotak lebih kecil dengan Rounded Rectangle Tool juga dengan radius 5 px
Ubah nama Layernya Layer Orange

dan kasi Layer Style na...

Hasil na..

Lanjut pake Custom Shape Tool, pilih --> Envelope2

Lu tarik deh tuh shape nya tepat di atas Layer Orange, ambil warna Shape nya = #FFFFFF. Kalo Layer Stylena masih ngikut Layer Style Sbelumnya, Lu klik kanan aja di layerna dan pilih Clear Layer Style.

Nah abis tuh, lu tambah2in deh text na, tapi sesuaikan aja warna text na dengan warna Layer Orange..biar nyambung getoooohh...hakhahhak

Dengan cara yg sama persis, lu masih bisa bikin contoh2 tombol lainna...

From dremi

Learn to draw a head phone for a sound system website

2007-10-18T13:46:00.000+07:00

Free photoshop tutorial how to create an image or logo of Head Phone for audio website template.

[1]- First of all open a new document
size 400x400 pixelRGB color mode.

[2]- Now create a new shape help by the
Rectangular marquee tool as shown below

[3]- Create a new Layer1
from the Layer palette

[4]- Fill the Black color help by the Alt+Backspace
now press the Ctrl+D to deselect

[5]- Now go to Filter>Distort>Polar Coordinates
and use the following settings

[6]- Now select the Move tool and
Press the Ctrl+T now right click
and select the Flip Vertical

[7]- Double click on this layer1
and select the Satin from the
layer style now use the settings below

[8]- Now your image should lool like this

[9]-Select the Elliptical marquee
tool with Add to selection.

[10]- Create a new layer2
from the layer palette

[11]- Create a new shape
help by the Marquee tool

[12]- Fill the Gray and white color
help by the Radial Gradient tool

[13]- Now your image
should look like this

[14]- Press the Ctrl+J and
drag it shape help by the
Move tool Now press the Ctrl+T
and right click noe select the
Flip Horizontal after
that Press the Enter key

[15]- Double click on this Layer1
after that Layer2 and select the
Drop Shadow now use the settings below

[16]- Your image should look like this

[17]- Type any compny name help by the
Text tool as shown below And now your
image has been completed

From photoshopzilla

3D Text Tutorial

2007-10-18T13:29:00.000+07:00

There is a simple way to simulate faux 3d Text in Photoshop. This technique can be adapted for different perspectives as well.

Open a new canvas in Photoshop. Mine was 500×500px. Grab the text tool and type out your text in a large, bold font (I used Impact).

Once you’re happy with your text, we’re going to rasterize this layer so we can transform it. Right-click the layer with the text, and select Rasterize.

Now to adjust the perspective. Hold down Ctrl-T to enter into transform mode. Right click the image and select Perspective.

Here I grabbed the upper right corner and dragged it downwards to achieve the following effect.

To make things easier in the next step, create a new folder. Drag your text layer into this folder.

Now we’re going to duplicate the text layer, while nudging it forward one pixel. Hold down Ctrl+Alt, then click the right arrow until you are satisfied with the depth of the text.

Drag the top-most layer out from the folder. Select the folder and hold down Ctrl-E to merge all those layers into one.

Select the top-most layer and apply a Gradient Overlay to it under Blending Options. Here I’ve opted for a subtle green gradient.

Select the bottom layer and apply a 3px black Stroke.

This is what your text should look like so far:

Head over to the next page to learn how to add a small highlight to your 3D text!

Now we can add a small highlight to the text. Duplicate the top layer and delete the layer style.

Select this new layer and fill it with white (hold down Ctrl while selecting the layer).

With the Rectangular Marquee Tool selected, nudge this selection down and left by 2 pixels.

Making sure your highlighted layer is selected, hit Delete.

Set the Blending Mode of the highlighted layer to Overlay. And there you have it! Faux 3D text.

Here are more examples of different perspectives and styles using the same technique. When you’re duplicating layers for depth, you would hold down Ctrl+Alt as usual, but you may have to select a different directional arrow.

From mintyferret

Calendar Icon Tutorial

2007-10-18T12:21:00.000+07:00

Learn how to make those Calendar Icons you frequently see on blog sites.

PSD files for this Photoshop tutorial are included, and a package of free Calendar Icons are available for you to download as well!

Make a new document in Photoshop. I’ve made mine 100×100 pixels.

Making sure you’re working on a blank layer, grab the Rectangular Marquee Tool. Holding down Shift, drag out a square.

Fill the square with any colour. We will be adjusting this layer with Blending Options.

Select Blending Options for this layer.

Select Inner Shadow. Set the blend mode to Normal.

Select Gradient Overlay. Create a subtle light gray - near white gradient. Set the angle to 127 degrees.

Select Stroke. Set the size to 1 px, and the colour to a dark red.

Select OK. This is what your calendar should look like so far:

Make a new layer. Ctrl-click the first layer (to select it).

Using the Rectangular Marquee Tool, hold down alt while dragging a rectangle over the bottom portion of the calendar.

This will leave you with just the top part of the canvas selected. Once again, fill this layer with any colour. We’ll adjust it in Blending Options.

Go to Blending Options. Select Inner Shadow. Change the Blend Mode to Normal, and select a light red/pink.

Select Gradient Overlay. Create a subtle dark - light red gradient. (If you’re dealing with lighter colours, you may also want to apply a 1 px stroke).

This is how your icon should look so far:

Nice job! Now head on over to the next page to learn how to add a shine to your calendar.

Now to add the shine. Ctrl-click the current layer to select it.

Select the Elliptical Marquee Tool.

Select the icon with two boxes intersecting.

Draw an ellipse over the area you want your shine to be.

Select the Gradient Fill Tool. Create white - transparent gradient.

Drag your pointer down to draw the gradient.

You may want to adjust the opacity of this layer:

And there you go! A slick Web 2.0 Calendar Icon. You can add some text either with photoshop or CSS to work on your webpage. Enjoy!

You can download the PSD file for this Calendar Icon tutorial.
An entire pack of free Calendar Icons, which comes in several different colours, is also available at this post. Enjoy!

From mintyferret

Create a Collage from a single photo

2007-10-18T12:19:00.000+07:00

I mean from

Ok. Here we go

Step 1. From the background photo. Copy a new layer (Ctrl + J).

Step 2. Create a new layer between Background and Layer 1.

And use paint bucket tool (G) to paint the layer 2 with black color.

So here it is:

Step 3. Create a new folder.

and put Layer 1 to folder Set 1

Step 4. Now, create the first small image:

Create a new layer under Layer 1 on folder Set 1

Use Rectangle tool (U) to draw a square.

Choose the layer 1.

Use Create Clipping Mask (Ctrl + G) to change the top layer (layer 1) to mask by layer 3

You will see like that:

Step 5. Create the border of the image:

Create a new layer under the mask layer (layer 3)

Use Rectangle Marquee tool (M) to create the border of the image:

and use Paint Bucket tool (G), fill the selection with white

Done with the first small image.

Step 6. Now, add the drop layer style for this small image:

and change like that:

Here it is

Step 7. Rotate the first small image:

Link layer 3 and 4.

Rotate it (Ctrl + T)

Step 10. Now, create the second image.

Choose the Set 1 and choose Layer / Duplicate Layer Set

We will have like that

Step 11. Now, move and rotate the second one.

Choose the group Set 1 copy

Rotate it (Ctrl + T)

Repeat Step 10 and Step 11, we will have the final.

From bruinstutorial

Create mix light swirl using lens flare and Mezzotint effect

2007-10-18T12:17:00.000+07:00

Summary:
Adobe cs2 Free hands on photoshop training on the web – how to use lens fare in photoshop and create swirl.Free Hands on Training photoshop tutorial on the web – use Mezzotint effect and create a broken pixelated effect.

Free photoshop tutorial how to make a swirl of mix light using photoshop.

[1] Take a new file of 400 pixels, 400 pixels
of resolution 72 dpi in the RGB mode.

[2] Now create a new layer.

[3] Then go to Filter>Render>Difference Clouds
and press Cntl+F 4 time.

[4] Then go to Filter>Pixelate>Mezzotint
use these settings.

[5] Your image something look like this.

[6] Then go to Filter>Blur>Radial Blur.

[7] Now Press Cnlt+F 2 more
time your should look like this.

[8] Then make the copy of layer 1.

[9] Then go to Filter>Distort>Twirl
use these settings.

[10] Your image should be look like this.

[11] Then again make the
copy of Layer 1 copy.

[12] Then go to Filter>Distort>Twirl
use these settings.

[13] Your image should be look like this.

[14] Now change the Blending Mode for Layer1
copy and Layer 2 copy see in the next image.

[15] Your image will be look like this.

[16] Now select the layer 1.

[17] Now press Cntl+U
to add some color.

[18] Your image look like this.

[19] Then select layer 1 copy.

[20] Now again press Cntl+U
use the following settings.

[21] Then select the Layer 1 copy 2.

[22] And press Cnlt+U
use the following settings.

[23] Your image should be look like this.

[24] Then go to Filter>Render>Lens Flare
use the following settings.

[25] Your final image should be look like this.

From tutorial-100

Colorful Splatter Logo Tutorial

2007-10-18T11:59:00.000+07:00

Learn how to create a colorful splatter logo using all sorts of techniques such as Gradients, Brush use, Shapes and Color choice.

The outcome – Really the finished outcome has a transparent background so that it can be seen and mix with any background it is placed upon. For the tutorial however I will place it on a white background.

Step 1 – First we need to create our canvas, to do this simple go to File -> New… Then choose your canvas size. I chose 300 x 300 and put it on a transparent background but that is up to you.

Step 2 – Now you want to choose your symbol or letter for your main part or the focal point. I chose a font called “Danube” and chose the size 100px and set it to AA- Strong. Then I put the letter “S” in the middle of the canvas. It doesn’t matter what colour your font is because that is all going to be changed.

Step 3 – Now we need to right click our text layer and select blending options. If you are trying to attempt the same colours as mine then take a look at these screenshots and follow the settings carefully. Or feel free to adjust the settings to your own taste.

Drop Shadow :

Inner Shadow:

Inner Glow:

Satin:

Gradient Overlay – Most important part with the blending options so watch closely:

Here’s what the finished letter looks like :

Step 4 – Now that we have done our main symbol we need to create the little bars that go underneath it. To do this you go to the shape tool and choose the “Rounded Rectangle Tool” then you create a bar that seems long enough for your needs and then press “Ctrl + T” and rotate it the way you want it. Don’t forget to move it underneath your symbol in the correct place.

Step 5 – Now we need to duplicate the rectangle three more times using the shortcut “Ctrl +J” while being clicked on the first one. Or do it manually using right click – duplicate layer. Now you need to move all four shapes to their correct positions on mine they are next to each other going to the right diagonally. Then change the colour of all 4 to match the colours you used on the gradient. ( I also lowered the opacity on each of them to 65% ) You should also see the drop shadow now too.

Step 6 – Now you need to create a splatter shape in Illustrator or get some splatter brushes which are good quality and good variety. Choose a nice one and brush it onto your canvas just the once. Make sure its bang in the middle of the rest of your items and place the layer underneath everything else (except the background obviously) Now we need to add some blending options.

Inner Shadow

Gradient Overlay

Step 7 – Now for the final step all you need to do is place the middle text in the middle of your symbol this could say anything but mine says “Portfolio”.. Just use the font “Danube” again and set it to a small size. Then add a drop shadow and maybe a few other things to make it look better for you.

That’s it! Congratulations if you finished the tutorial with a nice result and I hope you get to use it somewhere nice. Remember you can change the colours at any time.. If you liked this tutorial please sign up at www.Sigvault.com/forums for a lot more. You can download the final PSD here.

From sigvault

hi

2007-10-18T11:36:00.001+07:00